Feb 12, 2024     Fettling       Category: Ignition

I've been working on the SDS electronic ignition. I had to splice in some extra length to the coil trigger leads to enable me to pull the control module off the port fuselage side to adjust and program it. I marked the flywheel with some timing marks so I don't have to get so close to the prop to time it.

Also fabricated some shims for the LED strobe/nav lights so the vertical sectors are correct.

Registered the ELT.

Adjusted the Peter Anson flap stop for the right hand flap.

Secured the last few fasteners on the windscreen and puttied it up.